Important Safety Information; Important Charging Information - Projecta HP2012 HP2200 User Manual

IMPORTANT SAFETY INFORMATION

Please read this manual thoroughly before use and store in a safe place for future
reference.
WARNINGS
• Risk of explosive gas. Working in the vicinity of a lead-acid battery can be dangerous.
Batteries release explosive gases during normal operation, charging and while
jumpstarting a battery. Before using this jumpstarter, read and follow the instructions
carefully. Follow all manufacturer's instructions and warnings of the vehicle's battery
and other equipment being used.
• Jumpstart lead-acid batteries only. Do not use to jumpstart dry-cell batteries commonly
found in household appliances. These batteries may burst and cause injury and/or
property damage.
• Do not smoke, use matches, use a cigarette lighter, or allow a spark or flame near
the battery.
• Do not allow metal to come in contact with the battery posts. It may spark or short-
circuit the battery and cause an explosion.
• Always wear eye protection when operating the jumpstarter
• Remove rings, bracelets, necklaces and watches when working with a lead-acid battery.
• Contains a sealed non-spillable lead acid battery and must be disposed of properly.
• Ensure correct polarity when connecting to vehicle.
• Do not submerge jumpstarter in water.

IMPORTANT CHARGING INFORMATION

• Charge jumpstarter prior to first use, this may take up to 24 hours.
• Fully recharge the jumpstarter after every use and follow charging instructions.
• When jumpstarter is not in use ensure jumpstarter is always on charge.
• Do not allow jumpstarter to become very flat. If the jumpstarter's battery is below
12.6V in 12V mode or below 25.2V in 24V mode, ensure the jumpstarter is charged
immediately.
2