Interface Circuit Packs - Nortel Optical Multiservice Edge 6130 Planning Manual

Interface circuit packs

The OME6130 Release 1.0 supports one 2x155/622M aggregate circuit pack
where two STM-1 or STM-4 line interfaces are present. The OME6130 also
supports four tributary slots that can be equipped with the following circuit
packs:
•
•
•
•
•
Table 2-2
OME6130 Release 1.0.
Table 2-2
OME6130 tributary circuit pack summary
Circuit pack
8x10/100BT L1
2xGE L1
28xE1/DS1
3xE3/DS3
2x155M
For more information about the tributary circuit packs, refer to
interface circuit pack descriptions on page
slot equipping rules, refer to
8x10/100BT L1 circuit pack
2xGE L1 circuit pack
28xE1/DS1 circuit pack
3xE3/DS3 circuit pack
2x155M circuit pack
Note: When the tributary slots are not equipped with a circuit pack, a filler
panel must be installed.
provides a summary of the tributary circuit packs supported in
Port density/
circuit pack
8
2
28
3
2
Planning Guide NT6Q92MA Rel 1.0 Iss 1 Standard September 2006
Notes
• GFP-F mapped (ITU-T G.7041
compliant)
• GFP-F mapped (ITU-T G.7041
compliant)
• unframed E1
• CRC4 framed E1
• unframed DS1
• ESF DS1
• unframed E3
• G.832 framed E3
• unframed DS3
• ASYNC framed DS3
• STM-1 optical and electrical SFPs
supported
4-10. For more information about
Chassis layout on page
Feature overview 2-9
Tributary
8-2.