Ome6130 Network Element Configuration Rules; Chassis Layout - Nortel Optical Multiservice Edge 6130 Planning Manual

8-2 Ordering information and system engineering rules
Table 8-1 (continued)
Topics in this chapter
Topic
Right to use licenses
Engineering and support services
OME6130 documentation
RoHS compliant equipment
Ordering procedures
Ordering OME6130 chassis, circuit packs, and software
Ordering cables, documentation, and services

OME6130 network element configuration rules

This section documents the OME6130 network element configuration rules,
including slot numbering, bay equipping rules, shelf equipping rules, and site
engineering recommendations.

Chassis layout

Table 8-2
OME6130 chassis and the corresponding slot numbers.
OME6130 chassis layout.
Table 8-2
Chassis components
Circuit pack or component
2x155/622M aggregate circuit pack
8x10/100BT L1 circuit pack
2xGE L1 circuit pack
28xE1/DS1 circuit pack
3xE3/DS3 circuit pack
2x155M circuit pack
Power supply unit
(DC)
OAM circuit pack
Optical Multiservice Edge 6130 NT6Q92MA Rel 1.0 Iss 1 Standard September 2006
lists the circuit packs or components that can be inserted into the
Figure 8-1
Slot number Note
Slot 6 1, 3,
Slots 4, 5, 8, 9 2,
Slots 4, 5, 8, 9 2, 3,
Slots 4, 5, 8, 9 2,
Slots 4, 5, 8, 9 2,
Slots 4, 5, 8, 9 2, 3,
Slots 1, 3 3,
Slot 2 3
Page
8-19
8-19
8-19
8-20
8-22
8-29
shows the
5
3
5
3
3
5
4