Facility Management; Managing Facilities - Nortel Optical Multiservice Edge 6130 Planning Manual

6-4 OAM&P description
visible in the OAM&P management system through applications such as Node
inventory and Node slot view. Similarly, the SFP modules inserted into the
STM-1/4 and GE ports are automatically detected and are auto-provisioned
in-service. The SFP status and details are presented in the Node inventory
application.
Before you can delete the equipment from the inventory, you must physically
remove the module from its slot.For more information, refer to Provisioning
and Protection Switching Procedures, 323-1855-310.

Facility management

A facility represents an equipment's OAM&P capabilities that allows the user
to provision, inspect, and control that interface. For the OME6130, a facility
represents an optical, electrical or service interfaces, such as:
•
•
•
•
•
•
•
For a complete list of editable and retrievable facility parameters, refer to
Provisioning and Protection Switching Procedures, 323-1855-310.

Managing facilities

Facility provisioning is a nodal function that allows you to query and edit
facility attributes on a specific interface.
The user manages facilities from the corresponding application menu in the
Provisioning main menu:
•
•
•
•
Optical Multiservice Edge 6130
STM-4 optical interfaces and STM-1 optical and electrical interfaces on
the 2x155/622M aggregate circuit pack
STM-1 optical and electrical interfaces on the 2x155M circuit pack
10/100BT Ethernet interface ports on the 8x10/100BT L1 circuit pack
Gigabit Ethernet optical interfaces on the 2xGE L1 circuit pack
WAN ports associated to 10/100BT Ethernet and Gigabit Ethernet
interface ports
E1/DS1 interface ports on the 28xE1/DS1 circuit pack
E3/DS3 interface ports on the 3xE3/DS3 circuit pack
STM
Ethernet
WAN
E1/E3/DS1/DS3
NT6Q92MA Rel 1.0 Iss 1 Standard September 2006