List Of Communication Data Formats - JUKI DDL-9000C-S Series Engineer's Manual

3)

List of communication data formats

Data name
Sewing data
Custom pitch data
Condensation custom data
Memory switch data
Panel program data
Panel program data
Main program data
(When communication data is other than the program data,)
(When communication data is the program data,)
Picto-
Extension
graph
DDL00XXX.EPD
(XXX:001~999)
VD00XXX.VDT
(XXX:001~999)
VD00XXX.VDT
(XXX:001~999)
DDL00 XXX .MSW
(XXX:001 ～ 999)
DDL00 XXX .MSP
(XXX:001 ～ 999)
SP RVL(6 digits) .HED
SP RVL(6 digits) .P00
MT RVL(6 digits) .HED
MT RVL(6 digits).P01
– 85 –
Description of data
Data format of sewing shapes and number of
stitches created on the sewing machine. This
format is specific to the DDL-9000C.
It is the data of needle entry point created with
PM-1, and the data format that can be operat-
ed in common between JUKI sewing machines.
It is the data of needle entry point created with
PM-1, and the data format that can be operat-
ed in common between JUKI sewing machines.
Memory switch data
All data maintained by the sewing machine
Panel program data
Main program data
1. While data is being written, the screen of
such a situation is displayed.
2. After writing of data is completed, the
current screen returns to the selection
screen of communication data No.
* When the screen giving you instructions
to turn off the sewing machine has been
displayed after completion of such a writ-
ing of data, turn off the sewing machine.
1. While a program is being written, the
screen of such a situation is displayed.
2. After such a writing of a program is com-
pleted, the screen giving you instructions
to turn off the sewing machine is dis-
played. Turn off then machine.
3. When you turn on the sewing machine
again, the written program is executed.