JUKI DDL-9000C-S Series Engineer's Manual page 128

No. Item
K103
Needle cooler output-off delay time
Delay time from a stop until an output-off, using the
needle cooler output function
K105
BT Angle that ends prohibition of output operation
The reverse-feed stitching output is prohibited below the
set angle.
K106
BT Angle that starts prohibition of output operation
The reverse-feed stitching output is prohibited over the
set angle.
K111
Sewing speed according to a fan motion
0: A fan motor always rotates. /100 and up: A fan motor
rotates when the current sewing speed exceeds the set
sewing speed.
K118
Cancellation of a grease-up error
If it is enabled at the time of power activation, clear a
counter of the number of stitches for a grease-up error
and its settings.
0: Disabled/1: Enabled
K125
Speed settings for one-touch type reverse feed
0: Disabled/1: Enabled
K126
Time for detecting if the sewing machine is being
locked
AT correction value
K130
Setting range Unit
SMS
100 to 2000 ms 500
0 to 359 Degree 112
0 to 359 Degree 262
0 to 4000 sti/min 0
-
0 to 1 0
150 to 5000 sti/min 4000
ms
500 to 2000 1000
-
−30 to 50 20
Initial value
SSH FMS FSH SMS CE SSH CS FMS CE FSH CE
500 500 500 500
112 112 112 112
262 262 262 262
0 0 0
0 0 0
4000 4000 4000 4000
1000 1000 1000 1000
20 20 20 20
500 500 500
112 112 112
262 262 262
0 0 0 0
0 0 0 0
4000 4000 4000
1000 1000 1000
20 20 20