Fig. 7.2-5 Schematic Diagram Of Connecting Optical Fiber - Zte ZXCBTS Series Installation Manual

ZXCBTS (V5.4) CDMA Micro Base Transceiver Station & Remote Station Installation Manual
7.2.1.2 Laying Optical Fiber
1.
2.
The core wires of the end equipped with a waterproof blocker are 0.7m long,
and those of the other end are 3m long. The end with a waterproof blocker is to
be connected with the remote station, and the other end is to be connected with
the ODF.
You can choose 50m/100m-long optical fiber for this connection based on the
actual situation.
Caution: If the ODF uses cubical connectors, contact ZTE in advance.
Connecting optical fiber for a micro-BTS/remote station
Because the end of the optical fiber for connecting a micro-BTS/remote station
is equipped with a waterproof blocker, you need to remove the cover of the
optical interface at the bottom of a micro-BTS/remote station first, insert the
pigtail fiber into the cabinet, and then screw down the waterproof blocker into
the optical interface, as shown in Fig. 7.2-5.

Fig. 7.2-5 Schematic Diagram of Connecting Optical Fiber

Connecting optical fiber for a macro-BTS
If the optical fiber is used to connect the Local Fiber Module (LFM) of a
macro-BTS, first insert the optical fiber into an interface on the front panel of
7-6
Waterproof
blocker
Optical
fiber