Connection Of Internal Cables; Connecting External Cables; Connecting Optical Fiber; Fig. 7.2-1 Structure Of Optical Fiber (1) - Zte ZXCBTS Series Installation Manual

7.1.2 Connection of Internal Cables

Refer to Appendix B for the connection of internal cables.

7.2 Connecting External Cables

7.2.1 Connecting Optical Fiber

The optical fiber connectors of micro-BTS/remote stations are SC connectors.
The ODF or optical connection box provided is equipped with FC connectors by
default. If there are special requirements on the connectors, contact ZTE for
customization.
7.2.1.1 Selecting Optical Fiber
Different optical fibers are used for the connections between macro-/micro-BTS and
remote stations.
1.
Note
If a remote station is near to a relative micro-BTS, optical fiber is used directly.
The optical fiber adopts waterproof pigtail cable, and both ends are equipped
with waterproof blockers and SC connectors. See Fig. 7.2-1 for the structure of
the optical fiber.
SC/PC connector
Optical fiber core
wire (0.7m)

Fig. 7.2-1 Structure of Optical Fiber (1)

Single-mode waterproof
pigtail cable
7-3
Chapter 7 Connection of Cables
Optical fiber core
wire (0.7m)
Waterproof
blocker