Installation Modes; Installing Cabinet On Pole; Fig. 4.1-1 Flow Of Installing The Cabinet - Zte ZXCBTS Series Installation Manual

ZXCBTS (V5.4) CDMA Micro Base Transceiver Station & Remote Station Installation Manual

4.2 Installation Modes

The cabinets of ZXCBTS micro-BTS/remote stations are the same in structure,
so is the installation method.
As shown in Fig. 4.1-1, the cabinet can be installed either on pole or on wall based on
the actual environment.

4.2.1 Installing Cabinet on Pole

1.
2.
Installation on pole
Install the support

Fig. 4.1-1 Flow of Installing the Cabinet

Note
Disassemble the support from the cabinet.
Secure the support onto the pole with fixing plates and 260mm-long bolts. The
diameter of the pole should be between 60mm and 90mm. 75mm is
recommended. See Fig. 4.2-1.
If the equipment is to be installed outdoors, face the front side southward and
the back side northward (This rule is applicable to the case that the equipment is
Outdoors
Install the sunshade cover
Install the cabinet
Installation check
End
4-2
Installation on wall
Install the support
Indoors