Fig. D.3-1 Location Of Indicators On The Oim Panel; Table D.3-3 Indicators On The Oim Panel - Zte ZXCBTS Series Installation Manual

ZXCBTS (V5.4) CDMA Micro Base Transceiver Station & Remote Station Installation Manual
3.
HL1
HL2
HL3
HL4
HL5
HL6
See Fig. D.3-1 for the location of the indicators on the OIM panel.
HL2
HL5 HL1 HL6
Fig. D.3 - 1 Location of Indicators on the OIM Panel

Table D.3-3 Indicators on the OIM Panel

Indicator
3.3V power indicator. When it is on, it indicates that the 3.3V power is being
supplied normally; when it is off, it indicates that the 3.3V power is not available.
Tx clock lock indicator. When it is on, it indicates that the Tx clock has been
locked; when it is off, it indicates that the Tx clock has not been locked yet.
Data receiving preparation indicator. When it is on, it indicates that the receiving
preparation has been completed; when it is off, it indicates that the receiving
preparation has not been completed yet.
Optical signal indicator. When it is on, it indicates that optical signals are available;
when it is off, it indicates that no optical signals are available.
5V power indicator. When it is on, it indicates that the 5V power is supplied
normally; when it is off, it indicates that the 5V power is not available.
Data receiving error indicator. When it is on, it indicates that errors exist in the
currently received data; when it is off, it indicates that the currently received data is
correct.
ZX3G1X-OIM
HL3 HL4
Meaning
D-4