Table of Contents
Advertisement
USER'S MANUAL. EN-106
3 INSTALLATION
3.1
Power Supply
To start using the EN-106, connect the external power supply to the
230V mains and the 12V to the instrument input.
Once connected to power, the device turns on and it takes about
20 seconds to be operational. Then the message KEYBOARD LOCKED
appears on the display.
3.1.1 Operation via external power supply
Use only the external power adapter supplied with the instrument.
3.2
Connection
3.2.1 Connection diagram examples
•
CONNECTION DIAGRAM FOR ONE MODULE
ATTENTION!
FOR
THIS
CONFIGURATION
FREQUENCIES DIFFERENT FROM THE ONES THAT YOUR TV IS
CURRENTLY USING.
Page 7
YOU
SHOULD
USE
OUTPUT
03-2012
Advertisement
Table of Contents
