Table of Contents
Advertisement
USER'S MANUAL. EN-106
4.4
ADVANCED configuration menu
When accessing through the option "Advanced Options", which is at
the basic configuration level, you access the advanced configuration level
where there are the options to configure the instrument.
SERVICE:
SERVICE ID:
TYPE:
LCN:
PRIV. DATA SP: Private data Specifier. The receiver uses it to properly
ORIG. NET ID:
NETWORK ID:
TS ID:
NIT VERSION:
Page 11
Television service name. (By default: "PROMAX").
It allows you to edit the service identifier that is being
digitised.
It allows the user to select the type of service to
digitise. Options are TELEVISION (video and audio
service encoded) or RADIO (only audio service encoded
with no video).
It specifies the index for the service sorting on the
digital
terrestrial
between 1 and 999.
identify the LCN value. (Default value according to the
user's country; consult the table with pre-set values).
Identifier of the original network. It is the number to
identify the network from where the signal comes.
(Default value according to the user's country; consult
the table with pre-set values).
It is the number that identifies the network where the
signal is distributed. (Default value according to the
user's country; consult the table with pre-set values).
It is the transport stream identifier. (Default value
according to the user's country; consult the table with
pre-set values).
Important: TS ID and SERVICE ID can not match up
with those that already exist on the current television
distribution network.
Network Information Table version. In some countries it
should match with other tables version received from
the receiver. (Default value according to the user's
country; consult the table with pre-set values).
television
receiver.
Values
are
03-2012
Advertisement
Table of Contents
