Table of Contents
Advertisement
5 CONFIGURATION UTILITY
The EN-106 Configuration Utility is an easy to use program for
Windows, that allows the user to configure
modulator from a personal computer, instead to do it from the modulator
display itself. Few of these parameters are only accessible from the
Configuration Utility. It also allows updating the modulator software.
Processes to install and use the EN-106 are detailed below.
5.1
Installing the EN-106 Configuration Utility.
Download the latest version of the Software EN-106 from the
1.-
PROMAX website.
Unzip the downloaded file, then the "EN106_vX.X_setup.exe"
2.-
file appears.
Double click on the file to run the setup application and follow the
3.-
steps.
5.2
EN-106 Configuration Utility
Connect the USB cable between the device micro-USB port
1.-
(powered) and the computer USB port.
Run the program by double-clicking on the desktop icon "EN-106
2.-
Configuration Utility".
Once the program is working, a window appears with three tabs.
3.-
Each tab provides access to a particular function. At the bottom
there is a white box showing all the orders and processes that the
instrument is doing.
When the program starts, it tries to communicate with the device.
4.-
If
successful,
configuration, showing it on screen. If there is no communication,
it will show the reason in the white box on screen.
If needed to stop / resume communication between the device
5.-
and the program, click on the Disconnect / Connect button
respectively.
03-2012
it
identifies
the
USER'S MANUAL. EN-106
parameters of the EN-106
device
and
downloads
its
Page 16
Advertisement
Table of Contents
