Related Manuals for Promax EN-106
Summary of Contents for Promax EN-106
- Page 1 EN-106 Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176 TestEquipmentDepot.com HOME DIGITAL MODULATOR - 0 MI1876 -...
- Page 3 SAFETY NOTES Read the user’s manual before using the equipment, mainly " SAFETY RULES " paragraph. The symbol on the equipment means "SEE USER’S MANUAL". In this manual may also appear as a Caution or Warning symbol. WARNING AND CAUTION statements may appear in this manual to avoid injury hazard or damage to this product or other property.
-
Page 5: Table Of Contents
4.3 BASIC configuration menu............10 4.4 ADVANCED configuration menu..........11 4.5 Menu tree ................14 4.6 Parameter only accessible from the Configuration Utility .....15 CONFIGURATION UTILITY...............16 5.1 Installing the EN-106 Configuration Utility.........16 5.2 EN-106 Configuration Utility ............16 5.2.1 Configuration ..............17 5.2.2 Updating................18 5.2.3 Help ...................19 ANNEX 1 REFERENCE TABLE FREQUENCY –... - Page 6 USER’S MANUAL. EN-106...
-
Page 7: General
EN-106 1 GENERAL Description The EN-106 is a module able to generate a signal in DVB-T format (Digital Terrestrial Television) from an audio / video (A/V) analogue input. The audio / video analogue input has three RCA sockets, one for VIDEO signal and two more for RIGHT and LEFT audio signal. -
Page 8: Specifications
USER’S MANUAL. EN-106 Specifications INPUTS Input Channels Composite (CVBS). Video PAL / NTSC / SECAM. Video System 0,5 – 2 Vpp. Audio 10 kΩ. Impedance 20 Hz to 20 kHz. Bandwidth 2 x Mono / Stereo. Audio system COMPRESSION MPEG-2 MP@ML. - Page 9 USER’S MANUAL. EN-106 CONNECTIONS RCA female 75 Ω (yellow) Video RCA female (white the left channel, red the Audio right channel). 1 DVB-T output, type F female, 75 Ω. 1 RF input, type F female, 75 Ω. For loopthrough or to connect several devices in sequence mode.
- Page 10 USER’S MANUAL. EN-106 03-2012 Page 4...
-
Page 11: Safety Rules
USER’S MANUAL. EN-106 2 SAFETY RULES General The safety could not be assured if the instructions for use are not closely followed. Use this equipment connected only to devices or systems with their common at ground potential or insulated from the mains. -
Page 12: Maintenance
USER’S MANUAL. EN-106 Symbols related with safety: Maintenance 2.2.1 Cleaning Recommendations CAUTION To clean the cover, make sure the instrument is disconnected. CAUTION Do not use scented hydrocarbons or chlorized solvents. Such products may damage the plastics used in the construction of the cover. -
Page 13: Installation
USER’S MANUAL. EN-106 3 INSTALLATION Power Supply To start using the EN-106, connect the external power supply to the 230V mains and the 12V to the instrument input. Once connected to power, the device turns on and it takes about 20 seconds to be operational. -
Page 14: Navigation And Edition Of Values
DIFFERENT OUTPUT FREQUENCIES AND TS ID VALUES. Navigation and edition of values. The instrument EN-106 is configured through its 5 keys and front panel display. In general, it is not necessary to configure the instrument to generate a DVB-T signal compatible with any digital terrestrial television receiver. -
Page 15: Operating Instructions
USER’S MANUAL. EN-106 4 OPERATING INSTRUCTIONS Description of controls and components Display (LCD). Menu navigation keys. Through holes for fixing screws on the wall. USB mini-B Female Connector. Input 12 V DC power adapter (included). Right audio input. Left audio input. -
Page 16: Starting
USER’S MANUAL. EN-106 Starting After connecting the power to the instrument, the message “PLEASE WAIT..” appears for 20 seconds. Then the message “KEYBOARD LOCKED” appears. To access to the configuration menus the user has to enter a password. Press OK The field “PASSWORD”... -
Page 17: Advanced Configuration Menu
When accessing through the option “Advanced Options”, which is at the basic configuration level, you access the advanced configuration level where there are the options to configure the instrument. Television service name. (By default: "PROMAX"). SERVICE: It allows you to edit the service identifier that is being SERVICE ID: digitised. - Page 18 USER’S MANUAL. EN-106 Audio gain at the input. Available values are from AUDIO GAIN: –12 dB to +30 dB (By default: 0 dB). Type of audio to encode. Available options are Stereo, AUDIO MODE: Mono, Dual and Joint Stereo (By default: Stereo).
- Page 19 USER’S MANUAL. EN-106 It allows the user to change to a new password to PASSWORD: access the menu. RESET It returns to the default values. SETTINGS: BASIC OPTIONS: It returns to the first menu with the basic configuration options. Page 13...
-
Page 20: Menu Tree
USER’S MANUAL. EN-106 Menu tree 03-2012 Page 14... -
Page 21: Parameter Only Accessible From The Configuration Utility
USER’S MANUAL. EN-106 Parameter only accessible from the Configuration Utility The following parameters are accessible only from the configuration utility EN-106 (see next chapter "Configuration Utility"). The remaining parameters can be modified both the configuration utility and from the module. -
Page 22: Configuration Utility
USER’S MANUAL. EN-106 5 CONFIGURATION UTILITY The EN-106 Configuration Utility is an easy to use program for Windows, that allows the user to configure parameters of the EN-106 modulator from a personal computer, instead to do it from the modulator display itself. -
Page 23: Configuration
USER’S MANUAL. EN-106 The following list shows each tab and its function: Configuration: It allows you to modify, load, save, send and receive parameters to / from the device. Parameters can be changed individually or depending on the region / country. -
Page 24: Updating
USER’S MANUAL. EN-106 Table of parameters This table lists all parameters and values associated and values: with the selected region or the values received from the device. Some of these parameters are accessible only through the Utility Configuration. Click on the text box to change the parameter value. -
Page 25: Help
It opens a window to select and load the update file ("PRO" extension). This file must be previously downloaded to the computer. The update file can be downloaded from the PROMAX website. Once the file is selected, the program will ask the user if he wants to update the device software. -
Page 26: Annex 1
USER’S MANUAL. EN-106 ANNEX 1 REFERENCE TABLE FREQUENCY – CHANNEL FOR UHF EUROPE BANDWIDTH: 8 MHz. Digital carrier Digital carrier Digital carrier Channel Channel Channel (MHz) (MHz) (MHz) 474.00 610.00 746.00 482.00 618.00 754.00 490.00 626.00 762.00 498.00 634.00 770.00 506.00... - Page 27 USER’S MANUAL. EN-106 Page 21 03-2012...
-
Page 28: Recomended Values Table
USER’S MANUAL. EN-106 ANNEX 2 RECOMENDED VALUES TABLE SPAIN FRANCE FINLAND NETWORK ID 12600 8442 13099 ORIG. NET ID 8916 8442 8438 TS ID PRIV. DATA SP 0x00000028 0x00000028 0x00000029 NIT VERSION VIDEO STD CARRIERS CONSTELLATION 64QAM 64QAM 64QAM CHANNEL BW... - Page 29 USER’S MANUAL. EN-106 Page 23 03-2012...
-
Page 30: Troubleshooting
Check the TS-ID is not the same as the one already being used in the TV distribution network or as the one used in any other EN-106 module. Check attenuation and put it to 0 dB. After scanning the whole TV band, it finds the service but Problem: it is not saved on the desired position. - Page 31 USER’S MANUAL. EN-106 I have forgotten the password. Problem: solution: Contact PROMAX (+34 93 184 77 02). Strange colours on screen. Problem: Possible Check the TV standard is correct (PAL / NTSC / solution: SECAM). Image on screen is pixelated or has bad quality.
- Page 32 USER’S MANUAL. EN-106 DESTINATION LABEL TECHNICAL SUPPORT SERVICE. v1.0.0 03-2012 Page 26...
- Page 34 PROMAX ELECTRONICA, S. L.