Table of Contents
Advertisement
AUDIO GAIN:
AUDIO MODE:
AUDIO
BITRATE:
VIDEO STD:
ASPECT RATIO: Aspect ratio applied when encoding the video (4:3,
CHANNEL BW:
CARRIERS:
GUARD INTER.:
CONSTELLA.:
CODE RATE:
LANGUAGE:
VERSION:
03-2012
Audio gain at the input. Available values are from
–12 dB to +30 dB (By default: 0 dB).
Type of audio to encode. Available options are Stereo,
Mono, Dual and Joint Stereo (By default: Stereo).
Bitrate to encode the audio. Available values are
between
96
kbit/s
256 kbit/s).
For bitrates of 224 Kbit/s or greater, the audio
Note:
mode can not be mono.
Standard of the video input (PAL, NTSC or SECAM).
(By default: PAL).
16:9). (By default 16:9).
Channel bandwidth (6, 7 or 8 MHz). (Default value
according to the user's country; consult the table with
pre-set values).
Signal transmission mode, 2K or 8K. (Default value
according to the user's country; consult the table with
pre-set values).
Safety signal margin (1/4, 1/8, 1/16, 1/32). (Default
value according to the user's country; consult the table
with pre-set values).
Constellation type used to transmit signal (QPSK,
16QAM, 64QAM). (Default value according to the user's
country; consult the table with pre-set values).
Available values are (1/2, 2/3, 3/4, 5/6, 7/8). (Default
value according to the user's country; consult the table
with pre-set values).
Language used on the menus. It can be Spanish,
English, French or Italian.
It
shows
the
instrument. This option is not editable.
USER'S MANUAL. EN-106
and
384
firmware
version
kbit/s
(By
default:
installed
in
Page 12
the
Advertisement
Table of Contents
