Table of Contents
Advertisement
4.2
Starting
After connecting the power to the instrument, the message
1.-
"PLEASE WAIT.." appears for 20 seconds.
Then the message "KEYBOARD LOCKED" appears. To access to
2.-
the configuration menus the user has to enter a password.
Press OK
3.-
The field "PASSWORD" appears. Enter the access code. (By
4.-
default: 0000).
Press OK
5.-
The field "FREQUENCY" appears, this is the first option on the
6.-
configuration menu.
4.3
BASIC configuration menu
On the first level there are the basic options for the instrument
configuration:
FREQUENCY:
ATTENUATOR:
SAVE
CHANGES:
ADVANCED
MENU:
03-2012
.
.
It sets the frequency value for the output signal. The
frequency range is from 50 MHz to 865 MHz. (By
default: 474 MHz).
Important: Check that the selected frequency is not
already being used by a current television distribution
channel.
It adjusts the power level of the output signal, in dB
units. Attenuation range from 0 to 40 dB. (By default:
20 dB).
It saves the current configuration on the non-volatile
memory of the instrument.
Through
this
configuration options. These options are detailed in the
following section.
USER'S MANUAL. EN-106
menu
you
access
the
advanced
Page 10
Advertisement
Table of Contents
