Installation - Promax EN-206 LITE Manual

1.3

Installation

Mount and tighten the screws and plugs to secure the unit to the wall.
Left 10 cm of free space around from each unit.
Connect the signal input in the respective connectors. The signal source
can be from a surveillance monitor, DVD, set-top box, CCTV and etc.
Optionally, connect the loop-through RF input coaxial cable.
Connect the RF output cable to a STB or TV.
Power supply connection: a) Connect the earth cable; b) Connect the
power plug to the unit mains connector; c) Connect the power plug to the
mains socket.
Figure 4.
3
June 2021