Table of Contents
Advertisement
X*
= Native resolution and refresh rate from EDID.
Firmware version
X(
=
Example: 1.00
Firmware and build version
X1)
=
Example: 1.00.0001
= Executive mode
X1$
0=unlocked/disabled (default)
1=locked/enabled
= Audio mode
X1%
1 = Audio input A follows input 1. Audio input B follows input 2 (default).
2 = Audio input A follows inputs 1 and 2. Audio input B is disabled.
3 = Audio input A is grouped to inputs 1, 3 and 5. Audio input B is grouped to inputs 2, 4 and 6.
= Auto-input switching mode
X1^
0 = disabled, manual switching (default)
1 = on or enabled, priority to the highest active input
2 = on or enabled, priority to the lowest active input
= AV mute mode
X1&
0 = normal operation (not muted, default)
1 = Enable AV mute by contact input
= Mute LED mode
X1*
0 = Always on (default)
1 = Off when muted
2 = Blink when muted
X1(
= Name is a text string of up to 24 alpha-numeric characters and a minus sign or hyphen (-). No
blank or space characters are permitted. No distinction between upper and lower case. The first
letter must be a letter, and the last character must not be a minus sign or hyphen.
Default: MPS-601
X2)
= Input HDCP status
0 = not connected
1 = HDCP encrypted (default)
2 = not HDCP encrypted
= Output HDCP status
X2!
0 = no sink detected
1 = Sink detected with HDCP
2 = Sink detected with no HDCP
= Pixel phase
X3)
0 to 63 (default=32)
= Total Pixels
X3!
+255 of the default value depending on input rate
= Horizontal start
X3@
0 to 255 (default=128)
X3#
= Vertical start
0 to 255 (default=128)
= HDCP status
X3$
0 = not connected
1 = HDCP encrypted
2 = not HDCP encrypted
= Verbose mode
X3%
0 = clear/none
1 = verbose mode (default)
2 = tagged response for queries
3 = verbose mode and tagged response for queries
MPS 601 • Remote Communication and Control
41
Advertisement
Table of Contents
