Table of Contents
Advertisement
Rack Mounting
Rack mount the switcher as follows (see figure 44):
1.
Attach the supplied rack mounting brackets to the switcher with the provided machine
screws).
2.
Insert the switcher into the rack, aligning the holes in the mounting bracket with those of
the rack.
3.
Secure the switcher to the rack using the supplied machine screws.
#10-32 Screw
w/ Nylon Captive
Cap Washer
Figure 44.
Table or Wall Mounting
The table and wall mounting brackets extend approximately 1/4 inch (6.4 mm) above the
top surface of the switcher enclosure allowing for an air space between the enclosure and
the surface. Follow the instructions provided with your mounting choice.
Optional Furniture Mounting Bracket
#8 Screw (4 Plcs)
Each Side
Optional Rack Mounting Bracket
Figure 45.
Rack Mounting the Switcher
Mounting Screws (2 Plcs)
-or-
Table or Wall Mounting the Switcher
Each Side
MPS 601 • Reference Information
47
Advertisement
Table of Contents
