Mitsubishi Electric FR-F700PJ Series Manual page 23

FR Configurator (INVERTER SETUP SOFTWARE)
Windows
FR Configurator is software that offers an easy operating environment.
Can be utilized effectively from inverter setting up to maintenance.
Parameter setting, monitoring, etc. can be performed on a display of Windows personal
computer.

RS-485 communication is available to connect a personal computer to an inverter using
a PU connector.

An RS-485-to-RS-232C or USB-to-RS-485 converter is required separately.
Serial port
Personal computer
Serial cable
(FR Configurator)
RS-232C/RS-485
converter
Startup
Desired function can be performed just after a start-up of the
software.
(1) Open the recent used System
File
(2) Perform Easy Setup
(3) Perform each function
(4) Help
Easy Setup
From station number to parameter setting, setting with
wizard style dialog (interactive) is available.
Procedure for Easy Setup
(1) System File setting
(2) Communication setting
(3) Inverter recognition
(4) Control method selection
(5) Motor setting
(6) Start command, frequency
command setting
(7) Parameter setting
Navigation area
In Navigation area, switching ONLINE/ OFFLINE
and changing operation mode can be performed.
(1) Frequency setting and forward/reverse
rotation [Test operation]
(2) Display the connected inverter in tree view
[System List]
(3) Function setting without regard to
parameter number [Basic setting]
(4) Estimates the cause of trouble, and
suggests counteraction. [Troubleshooting]
FR-SW3-SETUP-WE is available for download (free of charge) from the below URL on the internet. FR Configurator SW3 (FR-SW3-SETUP-
WE or FR-SW1-SETUP-WE) needs to be installed to the personal computer prior to updating the software. Also, user registration is required
for the download (free of charge.) (Registration is free of charge.)
Homepage address www.MitsubishiElectric.co.jp/fa
FR-SW3-SETUP-WE (for 700 series) and FR-SW1-SETUP-WE (500 series) can be installed from the FR Configurator SW3.
FR-SW3-SETUP-WE
®
(Windows 2000 Professional SP4 or later, Windows
®
XP Professional SP2 or later, Windows Vista
USB connector
or
USB cable
USB/RS-485
converter
PU connector
®
XP Home Edition SP2 or later,
® ®
SP1 or later, Windows 7 supported)
Inverter
Monitor area
In Monitor area, inverter status can be monitored.
(1) Displays monitor data in
waveform [Graph]
(2) Monitors the status of I/O
terminals. [I/O Terminal Monitor]
(3) Displays multiple data in batch
[Batch Monitor]
System area
In System area, parameter setting, Diagnosis,
Troubleshooting, etc. can be performed.
(1) Parameter reading,
writing, verification,
Functional List and
Individual List display are
available.
[Parameter List]
(2) Displays alarm history
and monitor value at
each alarm occurrence.
[Diagnosis]
(3) Parameter setting conversion from conventional models
[Convert]
Setting wizard
Setting wizard can set parameters with wizard style dialog
(interactive). Inputting or selecting required items for each
function, parameter setting can be made, without regard to
parameter number.
Help
Displays operating instructions and details of each
parameters.
23