Connections For Cut Editing Using Two Dsr-70/70P Units - I.link Connections; Required) - Sony DSR-70 Operating Instructions Manual

Connections for Cut Editing Using Two DSR-70/
70P Units —
Power Preparations

Required)

DSR-70/70P (recorder)
36
Chapter 2 Power Preparations and Connections
i.LINK Connections (Optional DSBK-140
For a cut editing system using two DSR-70/70P units with an i.LINK
interface, the following figure shows an example of the connections.
Use the same configuration when dubbing signals in DVCAM format via
an i LINK interface.
Note
In this case, both of the recorder and player require the DSBK-140 i.LINK/
DV Input/Output Board.
DV IN/OUT
Switch/menu
REMOTE/LOCAL
Sub LCD menu general
setting item REMOTE
Sub LCD menu home
page input video/audio
signal indication
It is possible to combine two DSR-70/70P units using the optional BKNW-
225 Docking Kit (see page 125).
Also, for ease of carriage of the unit, you can use a shoulder belt (see page
126).
For more example editing system connections, see Chapter 8"Connections and
Settings" (page 113).
DSR-70/70P (player)
DV IN/OUT
1
1 6-pin to 6-pin i.LINK/DV cable (supplied with the DSBK-140)
DSR-70/70P (recorder and player) settings
Recorder
LOCAL
i.LINK
i.LINK
Player
REMOTE
i.LINK
Other than i.LINK