Loading/Ejecting Cassettes - Sony DSR-70 Operating Instructions Manual

Loading/Ejecting Cassettes

To load a cassette
Paper clip, etc.
1
With the unit powered on, press the EJECT button.
The control panel lifts up and the cassette compartment opens.
2
Load a cassette in the direction shown in the figure.
The message "CASSETTE OUT" displayed on the LCD monitor
changes to "TAPE UNTHREAD".
Note
If the message on the LCD monitor does not change to "TAPE
UNTHREAD", redo the cassette insertion procedure.
3
Close the control panel. (You should hear a click.)
The STANDBY indicator lights.
1
LCD indicator
EJECT REW
6
0
3
2
Reel
PLAY F FWD STOP
SERVO STANDBY
p
)
STANDBY indicator
45
Chapter 3 Editing