Cuing Up Edit Points
To cue up an edit point
You can cue up any edit point, or cue up a position located a specified
amount of time before the edit start point (preroll).
To set the preroll time
Using the setup menu item 001, specify how many seconds (the preroll
time) in advance of the edit start point to set the preroll point.
The factory default preroll time is 5 seconds.
For details, see page 102.
Use the following procedures to cue up an edit point or preroll the tape.
Press and hold the recorder side or player side IN or OUT button, and
press the recorder or player PREROLL button while holding the IN or
OUT button.
AUDIO IN
–
LIST
DELETE
IN
The tape runs to the IN point or OUT point and stops.
+
TRIM
CLIP
MARK
LINK
ENTRY SHIFT
OUT
OUT button
IN button
REC
PREROLL
INHI
PREROLL button
53
Chapter 3 Editing