Making Settings In The Audio Settings Subpages - Sony DSR-70 Operating Instructions Manual

Audio settings page 1-3
LINE OUT MONI.VR
CH-1/2 ENA
Item Setting
LINE OUT Select channels 1/2 or 3/4 as the line
out channels.
MONI.VR Select ENA for an output level
determined according to the setting of
the PB AUDIO PRESET/VARIABLE
switch of the control panel, or DIS for
a fixed output level.
MONITOR Select the monitor audio output signal.
• Select METER to linking the monitor
audio output selection to the setting
of the METER switch for the display
panel. Either channels 1 and 2
mixed or channels 3 and 4 mixed will
be output.
• When not linking the monitor audio
output selection to the setting of the
METER switch, select the desired
channel (CH-1/CH-2/CH-3/CH-4).
Audio settings pages 2-1 to 4-3
Make settings in the same way as pages AU-2 to AU-
4.
Making Settings in the Audio
Settings Subpages
Use the audio settings subpages to make mix and swap
input and output settings for channels 1 and 2.
To display the audio settings subpages
1
Press F1 to highlight the audio settings item in the
home page.
2
If the item displayed is not "MIX/SWP", press the
UP button until "MIX/SWP" appears.
MONITOR [AU-1-3]
METER
3
Press the PAGE button.
An audio settings subpage (input mixing page)
appears as shown below.
TC 2/48k
00 : 35 : 09 : 04
NO
EDIT
MIX OFF 1+2m1
PAGE
F1 F2
To switch pages
Press the F4 button.
An output monitor settings page like the one below
appears.
TC 2/48k
NO 00 : 35 : 09 : 04
EDIT
1 2
PAGE
F1 F2
Each press of the F4 button switches between the input
mixing settings page and the output monitor settings
page.
To return to the home page
Press the PAGE button.
Contents of the audio settings subpages
When you change the settings of the audio settings
subpages, the settings of the AU-1 page change as
well, and vice versa.
However, when there is no item in the subpages
corresponding to a setting made in the AU-1 page, the
setting is not reflected in the subpages.
Chapter 4 Time Data and Sub LCD Menu
CL 184 BATT
1+2m2 IN /OUT
F3 F4
CL 184 BATT
1+2 IN/ OUT
F3 F4
71