Rear Panel - Sony DSR-70 Operating Instructions Manual

Location and Function of Parts
2 BREAKER button
When excess power flows inside the unit, the breaker
activates to protect the circuits by automatically
shutting down the power. After inspecting and
adjusting the unit, press this button. If there is no
further trouble, the power will be restored.
For inspection and adjustment of the unit, consult your Sony
dealer.

Rear Panel

Analog audio/video input and output section
1 48V ON/OFF switches
2 AUDIO INPUT CH-1/CH-2
level switches
3 AUDIO INPUT CH-1/CH-2
connectors
4 AUDIO OUTPUT CH-1/3 and
CH-2/4 connectors
1 48V ON/OFF switches
When the AUDIO INPUT CH-1/CH-2 level switches
are set to –60 dBu, setting these switches to ON causes
48-V power to be supplied to the AUDIO INPUT
connectors.
2 AUDIO INPUT CH-1/CH-2 level switches
Select the input level of the analog audio signals of
input channels 1 and 2.
24
Chapter 1 Overview
3 Shoulder belt attachment fixture
Attach the supplied shoulder belt.
For more information, see "Using the Shoulder Belt" page
126.
5 REF. VIDEO IN/OUT connectors and 75 termination switch
6 VIDEO INPUT connectors and 75
7 VIDEO OUTPUT 1 and 2 (SUPER) connectors
AUDIO INPUT VIDEO
OFF ON OFF ON
75 75
REF. INPUT OUTPUT
IN
1
0 0
-60 +4dbu -60 +4dbu
CH-1 CH-2
2(SUPER)
OUT
S VIDEO
IN
AUDIO OUTPUT
1/3 2/4
Y
MONITOR
AUDIO OUT
R-Y
8 S VIDEO IN/OUT connectors
9 MONITOR AUDIO connector
This illustration shows the DSR-70/70P fitted with the optional DSBK-170.
–60 dBu: Microphone input
0 dBu: Line audio input
+4 dBu: Line audio input (0 dBu = 0.775 Vrms)
For microphone inputs, use 48-V microphones, and set
the AUDIO INPUT CH-1/CH-2 level switches 2 to
–60 dBu and the 48V ON/OFF switches 1 to ON,
respectively.
Caution
Using a microphone other than a 48-V microphone
may damage the microphone.
termination switch
DC IN
REMOTE
TC IN
IN OUT
B-Y TC OUT