Connections For A Cut Editing System - Sony DSR-40/40P Operating Instructions Manual

Connections for a Cut Editing System

REF. VIDEO OUT
1
AUDIO CH-1/3 OUTPUT
AUDIO CH-2/4 OUTPUT
VIDEO OUTPUT
Y, R-Y, B-Y OUTPUT
DSR-40/40P
REF. VIDEO INPUT
(player)
MONITOR MONITOR
AUDIO VIDEO
3 1
Composite video input
Audio input
Source video
monitor
When you select assemble or insert
editing mode on the editing controller, the
EDIT MODE indicator lights on the front
panel of the recorder and the recorder
automatically enters the selected editing
mode.
The following figure shows a cut editing system configuration that uses
this unit as the player and a DSR-85/85P as the recorder.
For details of connecting devices other than the DSR-40/40Ps, refer to the
instruction manual of each device.
Notes
• When S-video or composite input is selected, S-video or composite
output is a through signal.
• The preroll time of the setting on the RM-450/450CE is required for more
than five seconds.
• Set RS-422 CUE-UP MODE to WITH VIDEO in the DSR-40/40P's SET
UP menu for improving the editing accuracy.
REF. VIDEO OUT
Video signal
REF. VIDEO OUT
generator
4
4
1
1
REMOTE
2
PLAYER
RM-450/450CE
Editing control
unit
AUDIO CH-1 IN
AUDIO CH-2 IN
VIDEO IN
Y, R-Y, B-Y IN
1
REF. VIDEO IN
1
MONITOR
AUDIO
3
Audio input
Main video
monitor
REF. VIDEO IN
RECORDER
1 75
coaxial cable (not supplied)
2 9-pin remote control cable (not
supplied)
3 Cable with RCA phono plugs (not
supplied)
4 Cable with XLR connectors (not
supplied)
Chapter 3 Using the Unit as a Player in an Editing System
DSR-85/85P
(recorder)
VIDEO REMOTE
OUT 2
(SUPER)
1
Composite
video input
2
33 GB