Sub Lcd Menu Display And Settings -- Making; Operating Mode And Video/Audio Signal Settings; Sub Lcd Menu Home Page And Sub Lcd Operation Buttons - Sony DSR-70 Operating Instructions Manual

Sub LCD Menu Display and Settings ––

Operating Mode and Video/Audio Signal Settings

The sub LCD menu displayed in the sub LCD allows
you to make operating mode and video/audio signal
settings for the unit.

Sub LCD Menu Home Page and Sub LCD Operation Buttons

The home page of the sub LCD menu is displayed
when you power the unit on.
Time data
display area
PAGE button
Sub LCD operation
buttons F1 to F4
1 Time data indication
Shows the type of time data being displayed.
TC: Timecode
UB: User bits
CNT: Counter count
2 Audio mode indication
This shows the mode in which audio is recorded.
2/48k: two-channel, 48 kHz mode
4/32k: four-channel, 32 kHz mode
– – : recording mode cannot be determined
66
Chapter 4 Time Data and Sub LCD Menu
1 Time data indication
2 Audio mode indication
TC 2/48k
00 : 35 : 09 : 04
NO
EDIT
AU-1 2/48k ANALOG
PAGE
F1 F2
8 Audio recording mode indication
7 Audio setting page selection indication
6 NO EDIT indication
3 CLIPLINK indication
4 Remaining tape time indication
5 Remaining battery power indication
UP
CL 184 BATT
DOWN
CMPST
F3 F4
!º Input video signal indication
9 Input audio signal indication
3 CLIPLINK indication
These show whether or not cassette memory is present
and whether there is CLIPLINK log data.
CM: appears when there is cassette memory
CL: appears when the cassette memory includes
CLIPLINK log data.
No indication: when there is no cassette memory
4 Remaining tape time indication
Displays the remaining tape time (in 2-minute
increments).
–: No cassette is loaded.
When the remaining time falls to 2 minutes or less, the
indication becomes 0 and flashes.
When a tape recorded in DV format (SP mode) is
played back, indication "SP" appears.
Making
UP/DOWN buttons