Settings for Editing
42
Chapter 3 Editing
2
Set the POWER switch to ON, then make the following checks.
When the unit is powered, the POWER indicator lights and the sub
LCD home page appears in the sub LCD.
Check
Indication/What to do
Enough
Check the remaining battery power indication.
battery
power
If "BATT" is flashing
remaining?
Replace the battery.
No
If "HUMID!" is displayed
condensation
Leaving the unit powered, wait until the
in the unit?
message disappears.
(In this case, the alarm message
"MOISTURE HAS BEEN DETECTED" also
appears on the LCD monitor.)
See for details
" 5 Remaining
battery power
indication"
(page 67)
"Condensation"
(page 127)