Connections For Two-Unit Synchronous Playback - Sony DSR-70 Operating Instructions Manual

Connections for Two-Unit Synchronous Playback

The following shows connections for synchronous
playback using two DSR-70/70P units.
In the following, the controlling unit is referred to as
the recorder and the controlled unit as the player.
DSR-70/70P (player)
Player settings
Switch/menu
REMOTE/LOCAL switch
122
Chapter 8 Connections and Settings
1
REF.
VIDEO
OUT
2
REMOTE
Setting
REMOTE
For information about how to carry out two-unit
synchronous playback, see the section "Two-Unit
Synchronous Playback" on page 89.
REF.
VIDEO
IN
REMOTE
DSR-70/70P (recorder)
1 75
coaxial cable (not supplied)
2 RCC-5G/10G/30G 9-pin remote control
cable (length 5 m (16 ft)/10 m (33 ft)/30 m
(98 ft), not supplied)
Recorder settings
Switch/menu
REMOTE/LOCAL switch
Setup menu item 004
Setup menu item 305
(When synchronizing,
synchronization accuracy)
REF. VIDEO IN 75
termination switch
Setting
LOCAL
ON (Synchronize.)
OFF (Do not
synchronize.)
ACCUR (±0 frame)
ROUGH (±1 frame)
ON