Table of Contents
Advertisement
3.0
Installation and start-up
Fig. 3. Fixation of the foot rest
Fig 4.
Fixation of the back rest
Fig 5.
Clamping screw
Fig. 6. Turning the head-rest
8
3.3
Mounting the footrest
Use the enclosed Allen wrench and the 2 socket screws
to fi x the footrest from the bottom to the seat. Due to the
elongated holes in the mounting plate, the footrest
can individually be positioned.
3.4
Fixation of the back rest
Insert the back rest into the provided opening. The round bolts
are locked into place in slightly tilting them forwards (
and tightening them with the cylinder head screw
M 8x20 and the spring washer Ø 8,1 (
3.5
Adjusting the head-rest
The height of the head rest can be adjusted by turning the
screw (
, Fig 5). It is possible to adjust the headrest in two
different positions. The headrest can completely be swivelled
backwards and then be pulled out from its support (Fig. 6).
3.6
Removing the head-rest
The head-rest can be removed by pulling it upwards out of
the backrest.
, Fig. 4)
, Fig. 4) .
Advertisement
Table of Contents
