Maintenance And Service; Troubleshooting - Atmos Chair 21 P Operating Instructions Manual

6.0

Maintenance and service

7.0 Troubleshooting

The ATMOS Chair 21 P was subjected to a close quality examination before leaving the factory. If, however, any problems
should occur please contact an ATMOS service technician.
error indication
height adjustment
is not possible
downward movement of the
chair under load
backrest cannot be adjusted
possible cause
lifting column is defective
lifting column is defective
gas spring is defective
 Only ATMOS technicians or experts authorized by ATMOS
are allowed to open the ATMOS Chair 21 P resp. to repair
or maintain it (with the exception of the cleaning work
described in these operating instructions). Pay attention
to technical and hygienic precautionary measures and
note the remarks in the service instructions for the ATMOS
Chair 21 P.
 Country-specifi c legislation is to be observed.
ATMOS neither guarantees error-free function nor is

ATMOS liable for personal injury and damage to property
if
• no original ATMOS parts are being used,
• the advice for use in these operating instructions is not
being observed,
• assembly, new settings, alterations, extensions and
repairs have been carried out by personnel not
authorised by ATMOS.
 The warranty will be rendered invalid in case of damages
caused due to the utilization of accessories or consumables
which are not approved by ATMOS for use with these
chairs.
remedy
exchange lifting column
 only by ATMOS service technician
exchange lifting column
 only by ATMOS service technician
exchange gas spring
 only by ATMOS service technician
11