Changing The Orientation Of The Fluid Inlet And Outlet Ports - Graco SaniForce 1590 HS Instructions-Parts List Manual

Changing the Orientation of the Fluid Inlet
and Outlet Ports
The pump is shipped with the ports facing the same
direction. To reorient the ports into any position:
1. Remove the clamps (130) holding the inlet and/or
outlet tee to the elbows.
2. Rotate the manifold tee (339) and reattach. Install
the clamps (130) and tighten handtight.
130
339
F . 4: Orientation of Fluid Ports (tri-clamp model
IG
shown)
310622ZAL
P
TI5133f
Installation
11