Changing The Orientation Of The Fluid Inlet And Outlet Ports - Graco SaniForce 515 Instructions For Use Manual

Changing the Orientation of the
Fluid Inlet and Outlet Ports
The pump is shipped with the ports facing the same
direction. To reverse the orientation of the ports:
1. Remove the clamps (12) holding the inlet and/or
outlet manifold to the covers.
NOTE: Inspect the o-rings and replace if necessary.
2. Reverse the manifold and reattach. Install and
tighten clamps snugly.
F . 3: Reverse the Manifolds
IG
3A1973L
12
ti17529a
Installation
9