2. Connection to the network
2.1 System requirements
The following equipment is required to connect the projector to your computer
through the network.
The projector: 1 unit,
1) For the wired connection *1
2) For the wireless connection *2
- Projector side
- Computer side
*1: The system for using the network function of the projector requires a
*2: An access point is required when the wireless LAN connection is used as
Infrastructure mode.
*3:
connected to the wireless network using other encryption method.
WPA2-PSK (AES)
WPA2-PSK (TKIP)
WPA-PSK (AES)
WPA-PSK (TKIP)
*4: Depending on the type of wireless network device and computer you are
using, the projector may not communicate properly with your computer, even if
device.
Network Presentation, My Image and Messenger. (
NOTE
LWU701i/LW751i/LX801i/LWU601i/LW651i
Network Guide
Computer: 1 or more sets
Simple Access Point mode
✓
✓
✓
✓
-
-
11
2. Connection to the network
(option :
Infrastructure mode
✓
✓
✓
✓
✓
✓
18)
): 1 unit *3
*4
SETUP menu in
020-000787-03
LIT MAN USR D2 Network