Troubleshooting - Screen Innovations Nano Roll 275 Series Manual Operation Instructions

VERIFY – Spring Tension and Upper Limit
5. Adjust the shade limiter using the included spanner wrench as shown below.
a. Turn the shade limiter counter-clockwise to
lower the upper limit.
6. Install the end caps and lock them in place with the set screw.
Verify Spring Tension and Upper Limit
b. Turn the shade limiter clockwise to raise
the upper limit.
Pg 11

TROUBLESHOOTING

Problem Cause
Shade is slow or jerky Spring does not have
when moving up enough pre-tension turns
Shade abruptly stops Spring has too many
at upper limit pre-tension turns
Shade doesn't stop at Limit incorrectly set.
upper limit
Thank you for purchasing an SI product. If you have any questions or need any assistance with your
Shade, we would love to help you.
Technical Support: 512.832.6939
Hours of Support: 7:30am - 5pm CST
Troubleshooting
Tech Support: 512.832.6939
Solution
Add one pretension turn at a time until the shade
operates smoothly.
Remove one pre-tension turn at a time until shade
stops at upper limit smoothly.
Use the included spanner wrench to adjust the upper
limit. Turn clockwise to move limit down, turn counter
clockwise to move limit up.
screeninnovations.com
support@screeninnovations.com
Pg 12