Table of Contents
Advertisement
6-2 Driver Installation
(5) On the Device Manager page, make sure OMRON V720S-HMU01 appears under the "Other
Device".
(6)
Point the OMRON V720S-HMU01 and click the right mouse button to open drop-down menu.
Choose the "Delete" in the menu to complete deletion.
After deleting the device, remove the RFID unit, then start to install the Driver again.
[To See Port Number]
Find the disPort.exe file in the utility folder that is extracted from the driver file, V720S-HMU01.exe.
Click the disPort.exe file. Following dialogue appears.
You can check what port number is assigned for the RFID unit (In the case of above dialogue, COM3:
is assigned.)
● Execution of
dispPort.exe requires another file CP210xManufacturing.dll in the same folder.
If you copy or move the dispPort.exe to use it, copy or move the CP210xManufacturing.dll file into the same place.
6-8
Caution
6-2
Advertisement
Table of Contents
