Table of Contents
Advertisement
6-2 Driver Installation
6-2
[Connection with RFID Unit]
After installing the Driver, connect the RFID unit (V720S-HMU01) to the computer through USB
connector.
(1) Just after connecting the RFID unit to the computer, following page appears.
(2) On the "Found New Hardware Wizard" page, Click "No, not this time" and then click "Next".
If you use the Windows 2000, this page is automatically skipped and the following page appears.
(3) On the second "Found New Hardware Wizard" page, make sure "Install the software
automatically [Recommended]" is checked then click the "Next" button.
6-4
Advertisement
Table of Contents
