Table of Contents
Advertisement
6-2 Driver Installation
[If you connect RFID unit before installing the Driver]
If you connect the RFID unit to the computer before installing the Driver, you can not set up the
Driver in the usual manner. After connecting the unit to the computer, one of following pages will
appear. See which page appears on your computer window and follow the procedures
corresponding to the page.
(1) On the page as below, click the "Cancel" button and then remove the RFID unit. Start Driver
installation according to the procedures described at the beginning of this section.
(2) On the page as below, click the "Cancel" button and then remove the RFID unit. Start Driver
installation according to the procedures described at the beginning of this section.
6-6
6-2
Advertisement
Table of Contents
