Danfoss VLT HVAC Drive FC 100 Operating Instructions Manual page 29

®
VLT HVAC DRIVE High Power
Operating Instruction
The E1 enclosure is always delivered with a
pedestal as standard. Install the pedestal on
the floor. Fixing holes are to be drilled accord-
ing to this figure:
Mount the drive on the pedestal and fix it with
the included bolts to the pedestal as shown on
the illustration.
MG.11.F1.02 - VLT ® is a registered Danfoss trademark
Illustration 3.23: Drill master for fixing holes in
floor.
Illustration 3.24: Mounting of drive to pedestal
3. How to Install
3
29