Danfoss VLT HVAC Drive FC 100 Operating Instructions Manual page 117

High power
Hide thumbs Also See for VLT HVAC Drive FC 100:
Table of Contents

Advertisement

®
VLT
HVAC DRIVE High Power
Operating Instruction
Control card, 10 V DC output:
Terminal number
Output voltage
Max. load
The 10 V DC supply is galvanically isolated from the supply voltage (PELV) and other high-voltage
terminals.
Control characteristics:
Resolution of output frequency at 0 - 1000 Hz
System response time (terminals 18, 19, 27, 29, 32, 33)
Speed control range (open loop)
Speed accuracy (open loop)
All control characteristics are based on a 4-pole asynchronous motor
Surroundings:
Enclosure ≤ enclosure type D
Enclosure ≥ enclosure type D, E
Enclosure kit available ≤ enclosure type D
Vibration test
Max. relative humidity
Aggressive environment (IEC 721-3-3), uncoated
Aggressive environment (IEC 721-3-3), coated
Test method according to IEC 60068-2-43 H2S (10 days)
Ambient temperature
Ambient temperature
Derating for high ambient temperature, see the Design Guide, section on Special Conditions
Minimum ambient temperature during full-scale operation
Minimum ambient temperature at reduced performance
Temperature during storage/transport
Maximum altitude above sea level without derating
Maximum altitude above sea level with derating
Derating for high altitude, see section on special conditions
EMC standards, Emission
EMC standards, Immunity
See section on special conditions
Control card performance:
Scan interval
Control card, USB serial communication:
USB standard
USB plug
5% - 95%(IEC 721-3-3; Class 3K3 (non-condensing) during operation
Max. 45 °C (AVM switching mode only!) and max. 40 °C over a 24 hour
Max. 40 °C (SFAVM switching mode only!) and max. 35 °C over a 24 hour
EN 61800-3, EN 61000-6-3/4, EN 55011, IEC 61800-3
EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-5, EN
MG.11.F1.02 - VLT
®
is a registered Danfoss trademark
5. General Specifications
10.5 V ±0.5 V
: +/- 0.003 Hz
1:100 of synchronous speed
30 - 4000 rpm: Maximum error of ±8 rpm
IP 00, IP 21, IP 54
IP21/TYPE 1/IP 4X top
-25 - +65/70 °C
EN 61800-3, EN 61000-6-1/2,
1.1 (Full speed)
USB type B "device" plug
50
25 mA
: ≤ 2 ms
5
IP 21, IP 54
1.0 g
class 3C2
class 3C3
period.
period.
0 °C
- 10 °C
1000 m
3000 m
61000-4-6
: 5 ms
117

Advertisement

Table of Contents
loading

Table of Contents