Table of Contents
Advertisement
8
UTILITY PACKAGE (GX Configurator-MB)
8.4 Initial Setting
8 - 13
[Purpose]
Set parameters on the initial setting screen.
This setting eliminates the need for parameter setting by sequence programs.
The initial setting are as follows.
Basic parameters
Automatic communication parameters
MODBUS device assignment parameters
[Operating procedure]
"Start I/O No." → "Module type" → "Module model name" → Initial setting
[Setting Screen]
[Explanation of items]
(1) Parameter settings
Select a button under the Setting value, and set the parameters on the
corresponding screen.
Basic parameter setting (refer to Section 8.7.1)
Automatic communication parameter setting (refer to Section 8.7.2)
MODBUS device assignment parameter setting (refer to Section 8.7.3)
(2) Command buttons
Make text file
End setup
Cancel
Creates a file containing the screen data in text file format.
Saves the set data and ends the operation.
Cancels the setting and ends the operation.
MELSEC-Q
8 - 13
Advertisement
Table of Contents
