Cautions - Newport DL225 User Manual

DL Stage Series

Cautions

Do not place this stage in a hostile environment such as X-Rays, hard
UV,... or in any vacuum environment.
Do not place this stage in a location affected by dust, oil fumes, steam or
high humidity. This may cause an electric shock.
Do not leave this stage in places subject to extremely high temperatures
or low temperatures. This may cause an electric shock.
• Operating temperature: +10 to +35 °C
• Storage/Operating altitude: 1000 m
• Storage/Operating humidity: 85%
• Storage temperature: -10 to +40 °C (in its original packaging)
Do not move this stage if its motor power is on.
Make sure that the cable to the electronics is disconnected before
moving the stage. Failure to do so may damage the cable and cause an
electrical shock.
Be careful that the stage is not bumped when it is being carried. This
may cause it to malfunction.
When handling this stage, always unplug the equipment from the power
source for safety.
When the carriage is in its end-of-run position, it is strongly recommended
not to go beyond this point as this may damage the stage mechanism.
Contact your Newport service facility to request cleaning and
specification measurement every year.
ix
High-Performance Delay Line Stages
CAUTION
CAUTION
CAUTION
CAUTION
CAUTION
CAUTION
CAUTION
CAUTION
EDH0391En1031 — 03/18