Connection; Newport Cables - Newport DL225 User Manual

DL Stage Series
EDH0391En1031 — 03/18
5.2

Connection

On each stage is represented a label which indicates its name and its serial
number.
Always turn the controller's power OFF before connecting to a stage.
Stages may be connected to the rear panel motor connectors any time
prior to power-up with the supplied cable assemblies.
These stages are equipped with a chipset memorizing parameters.
Newport's exclusive technology enables Newport DL Controllers to
recognize the connected Newport stage. This ensures that the user can
operate the motion system quickly and safely.
5.2.1

Newport cables

DL stages are delivered with two 3-meter pigtailed cables that can be
directly connected to Newport Controllers.
DL Series stages can only operate with cable lengths of 3 m max.
These cables are shielded. For correct operation, make sure to lock
connectors (ground continuity provided by cables).
Keep the cables at a safe distance from other electrical cables in your
environment to avoid potential cross talk.
High-Performance Delay Line Stages
WARNING
NOTE
WARNING
WARNING
WARNING
10