Mercedes-Benz Sprinter Operating Instructions Manual page 92

90
Light and vision
3
Brake light: P 21 W
4
Indicators: PY 21 W
5
Reversing lights: P 21 W
6
Rear fog light (driver's side): P 21 W
7
Licence plate lighting: R 5 W
Tail lamp (chassis)
Requirements:
Clearance lamp: bulb type R 5 W
R
Indicators: bulb type PY 21 W
R
Brake light: bulb type P 21 W
R
Taillight: bulb type R 5 W
R
Rear fog lights: bulb type P 21 W
R
License plate lighting: bulb type R 5 W
R
Reversing lights: bulb type P 21 W
R
1
Light lens
2
Screws
3
Clearance lamp
4
Indicator
5
Brake light
6
Taillight
7
Rear fog light
8
Licence plate lighting
9
Reversing light
Switch off the lighting system.
#
Unscrew the screws
#
lens 2.
Remove the plug connector from the lamp
#
carrier.
Gently turn the bulb anti-clockwise and take it
#
out of the socket.
1 and remove the light
Insert the new bulb into the socket and turn it
#
clockwise.
Position the light lens
#
screws 1.
Replacing bulbs in additional lamps
Side marker lamps
Requirements:
Side marker lamps: light bulb type LED
R
Switch off the lighting system.
#
Position a screwdriver, for example, at the
#
side and carefully lever off side marker lamp
1 in the direction of the arrow.
Remove plug 2 from side marker lamp
#
the direction of the arrow.
Connect the new side marker lamp with the
#
plug.
Position the side marker lamp on the left and
#
press in.
The side marker lamp engages audibly.
Replacing interior light bulbs
Bulbs for rear interior lamps
Requirements:
%
For the standard bulb failure indicator func‐
tion to work correctly, only lights bulbs must
be used that are the same type and power as
those installed during production.
2 and tighten the
1 in