Mercedes-Benz Sprinter Operating Instructions Manual page 91

Open the rear door.
#
To remove: loosen the screws
#
out the tail lamps.
Remove the connector from the bulb mount
#
3.
Loosen the screws 2
#
mount 3 from the tail lamp.
Gently turn the bulb anti-clockwise and take it
#
out of the socket.
Insert the new bulb into the socket and turn it
#
clockwise.
To install: set the bulb mount
#
lamp and screw in the screws 2.
Press the connector into the bulb mount 3.
#
Insert the tail lamp and screw in the screws
#
1.
1 and pull
and remove the bulb
3 on the tail
Licence plate lighting
Requirements:
Licence plate lighting: light bulb type W 5 W
R
Switch off the lighting system.
#
Place a screwdriver, for example, at the open‐
#
ing 2 and carefully lever off the lamp lens
1.
Remove the bulb from the socket.
#
Insert the new bulb into the socket.
#
Position the lamp lens and clip it in so that it
#
engages.
Replacing rear light bulbs (chassis)
Overview of rear bulb types (chassis)
You can change the following bulbs.
Vehicles with standard tail lamps
1
Clearance lamp: R 5 W
2
Tail light: R 5 W
89
Light and vision