Mercedes-Benz Sprinter Operating Instructions Manual page 50

48
Opening and closing
Unlocking the electric sliding door manually
If there has been a malfunction or if the battery
has been disconnected, you can use release
catch 2 to disconnect the sliding door from the
electric motor. Then, you can open or close the
door manually.
Vehicles with complete sliding door trim:
#
remove the cover from release catch 2.
Service operation is accessible.
To disconnect the sliding door from the
#
electric motor: insert the key into opening
1 of release catch
tion.
Turn the key 180° clockwise. The "MAN" posi‐
#
tion is set.
Open or close the sliding door with the out‐
#
side/inside door handle.
To connect the sliding door to the electric
#
motor: insert the key into opening
release catch 2 in the "MAN" position.
Turn the key 180° anti-clockwise.
#
The "AUTO" position is set.
Adjust the sliding door (
#
If it is not possible to rectify the malfunction:
Visit a qualified specialist workshop.
#
2 into the "AUTO" posi‐
1 of
page 48).
→
Resetting the electric sliding door
Sliding door buttons on the centre console
Sliding door button on the door sill (B-pillar)
You must reset the sliding door if there has been
a malfunction or a voltage supply interruption.
If the sliding door is open: press button
#
2 on the centre console or sliding door but‐
ton 3 on the door sill (B-pillar) and hold until
the door is closed.
or
Closing the sliding door with the door handle
#
( page 47).
→
Then briefly press button
#
centre console or sliding door button
the door sill (B-pillar) once, or pull door han‐
dle ( page 47) to completely open the slid‐
→
ing door.
The sliding door is operational.
1 or
1 or 2 on the
3 on