Mercedes-Benz Sprinter Operating Instructions Manual page 157

if the camera lens is covered, dirty or misted
R
up. Observe the notes on cleaning the revers‐
ing camera ( page 190).
→
the camera or rear of your vehicle is dam‐
R
aged. In this case, have the camera and its
position and setting checked at a qualified
specialist workshop.
The field of vision and other functions of the
reversing camera may be restricted due to addi‐
tional accessories on the rear of the vehicle (e.g.
licence plate bracket or bicycle rack).
%
The rear-view mirror display contrast may be
impaired due to incident sunlight or other
light sources. In this case, pay particular
attention.
%
Have the rear-view mirror repaired or
replaced if its use is considerably restricted,
for example through pixel errors.
%
Objects that are not at ground level appear
further away than they actually are.
Examples of such objects:
the bumper of a vehicle parked behind
R
the drawbar of a trailer
R
the ball neck of a trailer coupling
R
the tail-end of a lorry
R
slanted posts
R
Displaying and hiding the rear-view mirror
display
Displaying
Engage reverse gear.
#
The reversing camera image appears in the
left area of the rear-view mirror.
%
Be aware of the system limitations of the
reversing camera with rear-view mirror dis‐
play.
Hiding
Engage another gear.
#
or
Switch off the engine.
#
The display will be hidden after a short time.
ATTENTION ASSIST
Function of ATTENTION ASSIST
ATTENTION ASSIST assists you on long, monoto‐
nous journeys, e.g. on motorways and trunk
roads. If ATTENTION ASSIST detects indicators of
fatigue or increased lapses in concentration on
the part of the driver, it suggests taking a break.
ATTENTION ASSIST is only an aid. It cannot
always detect drowsiness or increased lapses in
concentration in good time. The system is not a
substitute for a well-rested and attentive driver.
On long journeys, take regular and timely breaks
that allow you to rest properly.
You can choose between two settings:
Standard: normal system sensitivity
R
Sensitive: higher system sensitivity. The
R
driver is warned earlier and the attention level
detected by the system (Attention Level) is
adapted accordingly.
If fatigue or increased lapses in concentration are
detected, the Attention Assist: Pause!
appears in the Instrument Display. You can
acknowledge the message and take a break if
necessary. If you do not take a break and ATTEN‐
TION ASSIST continues to detect increased lap‐
ses in concentration, you will be warned again
after a minimum of 15 minutes.
Display in the Instrument Display (colour display)
You can have the following status information for
ATTENTION ASSIST displayed in the Assistance
menu of the on-board computer:
the journey length since the last break
R
the attention level determined by ATTENTION
R
ASSIST:
the fuller the circle is, the higher the
-
detected attention level is
the circle in the centre of the display emp‐
-
ties from the outside inwards as attentive‐
ness decreases
155
Driving and parking
warning