Page 12
The following instructions are in english. Localized versions can be found with the QR-code below. guide.danalock.com...
Page 13
Add the Danalock in the HomeKit App Dismounting When the Danalock has been mounted on the door it is ready to be set up with the Home app. Instructions on how to use the Home app can be found at: https://support.apple.com/en-us/HT204893...
Page 14
LED to start blinking yellow. Turn the Constant red till light finishes Lock has successfully locked Danalock to the desired locked position while the LED blinks and click the button once Constant green till light finishes Lock has successfully unlocked to save the locked position.
Page 15
Reset user settings latch back for 5 sec. This action will delete all user settings on the Danalock. The Danalock will respond by • Long wait will respond with one long green blink when being set and will hold the blinking red.
To install the latest firmware on your Danalock download the Controlling this HomeKit-enabled accessory automatically and Danalock app on App Store and log in as a ”HomeKit only” user. away from home requires an Apple TV with tvOS 10.0 or later or an Press the download icon on the front page in the app to start the iPad with iOS 9.0 or later set up as a home hub.