Download the Danalock App Go to Google Play or App Store and download the Danalock App. When the App has been installed, create a user profile and sign in. You will use this profile each time you sign into the App.
LED-Signals LED-Mode LED color Status indication Constant red till light finishes Lock has successfully locked Constant green till light finishes Lock has successfully unlocked Constant white for 3 seconds Power on. Batteries are activated Red light flashes every 5 minutes Critical battery level Constant purple Firmware is being updated...
Page 28
When you get to the setting you want to change, wait for 5 seconds and the Danalock will react to your command. If you make a wrong number of clicks, just stop at a number of clicks where the LED doesn’t light up and wait for 5 seconds.
Page 29
Green Inclusion mode This mode is used to in- or exclude your Danalock with a Z-Wave or Zigbee gateway. When the Danalock blinks green it is in ex/inclusion mode and you have 30 seconds to pair the Danalock with a gateway.
Page 30
Avoid Body Contact with Device during Operation 1. Dispose of the used battery according to the instructions Do not operate the Danalock in direct contact with your body. provided with the battery. Maintain at least 8 inches (20 cm) separation between the 2.
Page 31
EC Declaration of Conformity. Certificates and Declaration of conformity (DOC) statements = lead) are contained in the battery. can be downloaded from the danalock website: https:// Inappropriate waste handling could possibly have a negative danalock.com/ effect on the environment and human health due to potential hazardous substances.