danalock V3 US Easy Installation

Danalock V3 US Easy install
Tailpiece
Deadbolt
1. Download the Danalock app
Go to Google Play or App Store
and download the Danalock App.
When the app is installed you
create a user profile by pressing the
blue ring. You will use this profile
each time you sign into the app.
You will need to finish setting the
Danalock up in the app after
mounting it on the door.

3. Check door alignment

Ensure that your door is
properly aligned before
beginning installation.
You should be able to lock
your door without pushing,
pulling, or lifting the door.

5. Remove inside thumb-turn

Remove the inside thumb-turn,
leaving just the deadbolt and
tailpiece remaining.
Set aside the screws. You'll
reinstall them in step 7.
Thumb-turn
Thumb-turn
screws

2. Get your tools together

To install the Danalock,
you'll need a Phillips
screwdriver and tape,
preferably masking tape.
Should you need to
remove or readjust the
lock, a pen tip or paper
clip will be needed.

4. Secure outside keyhole

Before removing your
existing lock, use tape to
secure the outside
Thumb-turn
keyhole. This will keep it
must move and
in place as you remove
lock smoothly.
the screws on the inside.

6. Select a backplate

Find the backplate that
matches the brand of
your existing lock.
Back plate
B
Defia nt
Schlage, Weiser
Tailpiece adapters
A B
Omnia Schlage
Weslock Weiser
page 1/3
Danalock V3
Baldwin
C
Emtek
Kwikset